■ Product Description:
The access panel consists of aluminium profiles with gypsum plasterboard inlay GK 12.5mm, 15mm or 25mm and two snap locks.
Each of the two frames of the access panel consists of four single frame parts that are firmly connected due to a special welding processes. The inspection flap is equipped with a safety catch.
To avoid any accidents, it should be remounted after every opening of the door leaf.
Between the frame and the door leaf there is an air gap of 3mm, which is provided with a circumferential seal.
The concealed snap closures open when they are pressed.
■ Dimensions:
The Inspection Flap is made to match the dimensions of the tiling. For this purpose, dimensions of the tiles and the joint width are required, which indicate the dimensions of A and B.
The dimensions D and E always remain the same.
Dimension C correspons to the respective cladding thickness.
■ Variants:
For "tiling into the door leaf": The aluminium profile is flush with the GKBI plate. The tiles are placed on the profile.
For "tiling into the frame": The aluminium profile is higher than the GKBI plate. This creates a tiled tub.
Advantage: Easier installation for tilers and precise finish.
Our panels are suitable for "tiling into the frame".
If you need a flap for "tiling into the door leaf", feel free to contact us.
■ Product Description:
The Access Panel consists of aluminium profiles with drywall insert GK 12,5mm, 15mm or 25mm and to snaps.
The two frames of the Access Panel consists of four single frame parts by a special Welding processes are firmly connected. The inspection flap is equipped with a safety catch.
To avoid any accidents, this is to mount again after each opening of the door leaf.
Between the frame and the door leaf is an air gap of 3mm, which is provided with a circumferential seal.
The concealed snap closures open by pressure on the Access Panel.
■ Dimensions:
The Inspection Flap is tuned to the pitch of the tile. These are dimensions of the tile and the joint width required, from which then give the dimensions of A and B.
The Dimensions D and E remain the same in each case.
Degree C corresponding to the respective cladding thickness.
■ Variants:
For "top tiles": The aluminium profile is flush with the GKBI Plate. The tiles are placed on the profile.
For "clean tiles: The aluminium profile is higher than the GKBI Plate.
This creates a tiled tub.
Advantage: Easier installation for tilers and accurate financial statements.
Our valves are suitable for "clean tiles".
If you need a flap for "top files", feel free to contact us.
■ Product Description:
The Access Panel consists of aluminium profiles with drywall insert GK 12,5mm, 15mm or 25mm and to snaps.
The two frames of the Access Panel consists of four single frame parts by a special Welding processes are firmly connected. The inspection flap is equipped with a safety catch.
To avoid any accidents, this is to mount again after each opening of the door leaf.
Between the frame and the door leaf is an air gap of 3mm, which is provided with a circumferential seal.
The concealed snap closures open by pressure on the Access Panel.
■ Dimensions:
The Inspection Flap is tuned to the pitch of the tile. These are dimensions of the tile and the joint width required, from which then give the dimensions of A and B.
The Dimensions D and E remain the same in each case.
Degree C corresponding to the respective cladding thickness.
■ Variants:
For "top tiles": The aluminium profile is flush with the GKBI Plate. The tiles are placed on the profile.
For "clean tiles: The aluminium profile is higher than the GKBI Plate.
This creates a tiled tub.
Advantage: Easier installation for tilers and accurate financial statements.
Our valves are suitable for "clean tiles".
If you need a flap for "top files", feel free to contact us.
